Technical Reference Guide – Operator interface > 59
Set-up menu Auto LF Select whether to
perform auto LF
operation or not upon
receiving a CR code.
Yes
No
Auto CR Select whether to
perform auto CR
operation upon
receiving a carriage
return command.
(Display for IBM
emulation only)
Yes
No
Print DEL
Code
Set whether 7FH code
is printed with DEL
mark or not. (ML
emulation only)
No
Yes
SI select
Pitch (10
CPI)
Set how to handle an
SI command received
in 10 CPI mode. (IBM
emulation only)
15 CPI
17.1 CPI
SI select
Pitch (12
CPI)
Set how to handle an
SI command received
in 12 CPI mode. (IBM
emulation only)
12 CPI
20 CPI
Time out
print
Select valid or invalid. Valid
Invalid
Auto Select Select whether to
automatically set
Select Mode after
paper feeding or not.
Yes
No
Host
Interface
Select interface
settings.
Auto Interface
Parallel
USB
Serial
MENU ITEM FUNCTION SETTING
To Next Page
Loading...
