Oki ML1120 - Page 58

Technical Reference Guide – Operator interface > 58
Set-up menu Graphics Select the printing
direction when
double-height print
data exists in a line.
Bi-directional
Uni-directional
Receive
buffer size
Select size of the
received buffer.
1line
32 K
64 K
Paper out
override
Select whether to
detect paper end or
not.
No
Yes
Print
Registration
1
Adjust the print
starting position on
printing in the reverse
direction. (The
position moves to the
right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
Print
Registration
2
Adjust the print
starting position on
printing in the reverse
direction. (The
position moves to the
right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
Print
Registration
3
Adjust the print
starting position on
printing in the reverse
direction. (The
position moves to the
right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
7 or 8 Bits
Data Word
Set the character
code and graphics
data units to 7 or 8
bits.
(ML emulation only)
8
7
Operator
panel
function
Select full or limited
operation.
Full operation
Limited operation
Reset inhibit Set whether to enable
or disable an initial
command.
No
Yes
Print
suppress
effective
Set whether to enable
or disable a print
suppress setup
command.
Yes
No
MENU ITEM FUNCTION SETTING