Oki ML1120 - Page 65

Technical Reference Guide – Operator interface > 65
Symbol Sets
Menu
Slashed
Letter 0
Set whether to
convert slashed
0 located at 9BH
and 9DH in USA
code page or
not.
Yes
No
Rear feed
menu
Line Spacing Select line feed
pitch.
Yes
No
Form Tear-Off Select manual or
auto as the
method to
advance a
continuous form
to the form tear-
off position.
Manual
500 ms
1 sec
2 sec
Skip Over
Perforation
Select whether
to skip over
perforation or
not.
(When a skip
over perforation
setup command
is received, the
received
command is
given priority.)
Yes (25.4 mm/1 in)
No
Page Length Select the length
of a continuous
form.
279.4 mm (11 in)
296.3 mm (11 2/3 in)
304.8 mm (12 in)
355.6 mm (14 in)
431.8 mm (17 in)
76.2 mm (3 in)
82.6 mm (3.25 in)
84.7 mm (10/3 in)
88.9 mm (3.5 in)
93.1 mm (11/3 in)
101.6 mm (4 in)
127.0 mm (5 in)
139.7 mm (5.5 in)
152.4 mm (6 in)
177.8 mm (7 in)
203.2 mm (8 in)
215.9 mm (8.5 in)
MENU ITEM FUNCTION SETTING