Oki ML1120 - Page 66

Technical Reference Guide – Operator interface > 66
Rear feed
menu
Cut position
adjust
Select an
adjustment
value for the
position to cut
the end of a
continuous form.
(In 1/90 in
increments)
-20 – -1
0
+20 – +1
TOF
adjustment
(continuous)
Select an
adjustment
value for the
reference
position in
regard to the
TOF position of a
continuous form.
The position
moves to the
rear of the form
by [+] and to
the top of the
form by [-] in 1/
60 in
-20 – -1
0
+20 – +1
TOF
(continuous)
Select the
reference
position for the
TOF position
when auto
loading
continuous form
paper from the
rear of the
printer. (Up to
the midsection
of characters in
the first line.)
2.12 mm (1/12 in)
4.23 mm (2/12 in)
6.35 mm (3/12 in)
8.47 mm (4/12 in)
10.58 mm (5/12 in)
12.70 mm (6/12 in)
14.82 mm (7/12 in)
16.93 mm (8/12 in)
19.05 mm (9/12 in)
21.17 mm (10/12 in)
23.28 mm (11/12 in)
25.40 mm (12/12 in)
27.52 mm (13/12 in)
User top of form
Bottom feed
menu
Line Spacing Select line feed
pitch.
6 LPI
8 LPI
MENU ITEM FUNCTION SETTING