Olympus Fluoview FV1000 - Page 161

APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-77
Page
8. When using hardware that is compatible with rotation scan (FV5-IO3), specify the
image rotation angle using the rotation arrow buttons on both sides of the circuit in the
[Pan] group box in the [Acquire] panel.
9. Acquire the image with the buttons such as the <XYZ>, <XYT>, <XYZT>buttons.
10. After acquiring the image, select <Normal> under the [Surface XY] option button in the
[Mode] group box in the [Acquire] panel to return from the image acquisition mode.
Dragging the blue handle
along the circuit allows the
acquisition area to be tilted.
A
ssuming that the angle at
the top of the circle is 0°, tilts
the acquisition area by 1° pe
r
step in the counterclockwise
direction.
A
ssuming that the angle at
the top of the circle is 0°, tilts
the acquisition area by 1° pe
r
step in the counterclockwise
direction.
Displays the image rotation
angle. The angle can also be
specified by direct entry.
A
ctual zoom
value a
pp
ears.