APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-84
Page
5. Right-click the mouse on the [Ch] group box on the upper part of the [Acquire] panel.
When a pop-up menu appears, select the channel to be added.
A virtual channel will be added in the [Ch] group box. (Example: When [Using PMT 1]
and [Using PMT 2] are selected from the pop-up menus.)
It is not permitted to set the physically identical channels (an ordinary
channel and virtual channel) in the same group. (For example, ordinary
channel 1 and virtual channel 1 cannot be set in the same group.)
Sequential Group means a set of image channel which is acquired in a
sequential image acquisition.
Channel 1 and Virtual channel 1 needs to assign in deferent Sequential Group
since those channel can not acquire at the same time.
Select the channel to
which you want to add
a virtual channel.
Virtual channel
NOTE
TIP
To Next Page
Loading...
