APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-110
Page
4. Start the second scan in 10 seconds after the first scan is performed.
5. Select the [Disabled] or [REX mode] option button in the [AOTF] group box in the
[Lasers] sub-panel.
(The [Disabled] option button is selected.)
Select the the [Disabled] or [REX mode] option button within 10 seconds
before the next scanning is started.
In the TIME COURSE software (optional), when the REX mask file in the
REX or Bleach mode is changed while image scanning is performed
obtaining the real time graph, the laser is irradiated while the pop-up menu
is displayed, however, the real time graph is not plotted. Please be aware
this before using.
The laser of strong
intensity is irradiated
to the specified
region.
NOTE
NOTE
To Next Page
Loading...
