Olympus Fluoview FV1000 - Page 205

APPLIED OPERATIONS/Saving, Opening and Shredding Images
OPERATION INSTRUCTIONS
2-121
Page
5. Specify the area to be saved in the image in the image window.
The area is displayed on the image with the handles
on its frame.
The area becomes the save target while these
handles are displayed.
6. Click the <Annotate> button so that the list of buttons disappear.
7. Click the <Experiment> button in the [Save] group box.
The [Save Experiment As] dialog box appears.
Fig. 2-31 [Save Experiment As] Dialog Box
8. Use the [Save In:] drop-down list if you want to change the save destination drive and
directory.
9. Select “FLUOVIEW Multi Tiff” in the [Save as Type:] drop-down list.
It is not possible to save only the specified area of image in the Single TIF or
BMP format.
10. Enter the file name in the [File Name:] text box.
11. Click the <Save> button.
Handle
TIP