APPLIED OPERATIONS/Saving, Opening and Shredding Images
OPERATION INSTRUCTIONS
2-140
Page
The objective setting can be changed even after having acquired the
image. If the objective is not set with the [Acquire] panel before image
acquisition, the analysis and measurement results of the image may be
erroneous. In such a case, set the objective again.
When the objective setting is changed, the lengths per image pixel will be
re-calculated automatically and changed.
4. Display the [Image Fields] panel at the front. The panel as shown below appears,
where the information on the selected image is shown.
Fig. 2-39 [Image Fields] Panel
NOTE
NOTE
Range of intensity values
mapped for each channel.
Chan
es contents of Ima
e Field.
LUT status.
Acquisition parameters.
Version information.
Comment.
To Next Page
Loading...
