APPLIED OPERATIONS/Saving, Opening and Shredding Images
OPERATION INSTRUCTIONS
2-144
Page
6. Select the <Save> button. The [Save As ASCII Text] dialog box as shown below
appears.
Fig. 2-43 [Save As ASCII Text] dialog box
7. In order to change the save destination drive or directory, use the [Save in: ] drop-down
list.
8. Confirm that “ASCII text (*.txt)” is selected in the [Save as type: ] drop-down list.
9. Enter a file name into the [File Name: ] text box.
10. Click the <Save> button.
When the text file having the same name as the entered name is already
exists, the dialog box appears to ask you to overwrite the existing file or
not. When overwriting is not required, click the <NO> button and enter
another name to save the file.
When the image to be saved was acquired through multiple channels, the
observation conditions for all channels are saved.
NOTE
TIP
To Next Page
Loading...
