APPLIED OPERATIONS/ Protocol processor
OPERATION INSTRUCTIONS
2-164
Page
The images acquired in different sizes cannot be saved together. Execute
the Stop&Save command to save the image acquired before changing the
image size.
One Point!
Multiple image files saved using the Stop&Save command can be combined into a single
time-lapse image file.
Combine the file by referring to section 2-6-6-1, "Appending two images"
The destination of file save using the Save and Stop&Save commands is the
path displayed on the left of the [Image File Name] text box. If it is required to
change the file save destination, click the <Path> button on the right of the text
box and specify the folder in the displayed dialog box.
NOTE
TIP
To Next Page
Loading...
