APPLIED OPERATIONS/Protocol processor
OPERATION INSTRUCTIONS
2-193
Page
One Point!
XYZT observation protocol becomes available when “New mode”-“XYZT” is selected instead
of selecting “New mode” – XYT on [Mode] of [Track].
3 Saving the Protocol
Save the protocol edited.
The protocol can also be saved after being executed.
1. Select [Save] or [Save as] in the [File] menu in the [PAPP] window.
Save using the dialog box displayed.
For details, see section 2-4-3, “Saving the Protocol”.
4 Executing the Protocol
Execute the protocol assembled.
1. Click the <Start> button in the [PAPP] window.
For details, see section 2-4-4, “Executing the Protocol”.
Fig. 2-62 Panel While Executing the Protocol
<Start> button
To Next Page
Loading...
