APPLIED OPERATIONS/Changing the Image Display Method
OPERATION INSTRUCTIONS
2-201
Page
8. Click the <Graph display> button at the top right of the [Color Tool] dialog box again.
9. Finally, click the <OK> button to exit from the LUT editing.
One Point!
The [Color Tool] dialog box can also be displayed by a mouse operation.
1. Display the image to be colored at the front of the image window, and
right-click a point in the image.
2. A pop-up menu as shown below is displayed.
3. Select [View Processor] from the menu, then select [Intensity Scaling] from
the displayed sub-menu.
To Next Page
Loading...
