APPLIED OPERATIONS/Image Processing
OPERATION INSTRUCTIONS
2-238
Page
2. Right click on the frame at the top left of [Math] sub-panel, and select the file name of
first image in displayed pop up menu.
Before the dragging and dropping, the frame at the top left shows the icon of
the image file displayed in the image window.
3. Right click on the frame at the top left of [Math] sub-panel, and select the file name of
second image in displayed pop up menu.
(No second file dragging is needed when the image processing is by value.)
4. Enter the constant for use in operation in the [Scalar Value] text box in the [Scalar
Operations] group box.
(This step is required only for operation between an image and a constant.)
<Add 2 Images>
button
<Add to Image>
button
TIP
To Next Page
Loading...
