APPLIED OPERATIONS/Image Processing
OPERATION INSTRUCTIONS
2-268
Page
4. Select image slices by pressing on [Extract] dialog box.
The following method of slice selection is also available.
·All of image slices can be select by pressing <select all> button.
·All of row or column slices can be selected by pressing [No. Display].
·Image slices with a certain time interval and/or Z step can be selected by
pressing <Set> after set [T-Step] and/or [Z-Step] in [Equal Division].
·Image slices with a certain rectangular area on [Extract] panel can be selected
by dragging from top-left to bottom-right.
The slice assignment cleared by clicking <clear> button in [Extract] dialog box.
5. Click <Extract> button the extracted image appears in image window with named
[Crop].
TIP
TIP
To Next Page
Loading...
