APPLIED OPERATIONS/Image Analysis
OPERATION INSTRUCTIONS
2-289
Page
5.
Click the <Annotate> button in the toolbar. A list of buttons appear as shown below
.
6. From the displayed buttons, click the <Rectangular> button, <Circle> button,
<Polyregion> button or <Free Region> button.
7. Specify the region to be checked in the image in the image window.
For the specification method, see section 2-7-1-2, “Intensity Values on a Planar Region
(Bird’s Eye View)”.
A region is displayed on the image together with handles on the
perimeter. The region is selected as the target of mean value
computation operation while the handles are displayed.
If the mouse is clicked in other place than inside the region specified
on the image, the handles will disappear. On the contrary, clicking the
mouse in a region displays handles around it. The operation cannot be
executed while the handles are not displayed.
<Annotate> button
< Circle > button
< Free Region > button
<Rectangular > button
<Polyregion > button
NOTE
Handle
To Next Page
Loading...
