APPLIED OPERATIONS/Viewing 3D Image
OPERATION INSTRUCTIONS
2-306
Page
Fig 2-126 Example of Intensity Projection Fig 2-127 Example of Topographic Projection
Fig. 2-128 [Other options]
Sub-panel of [Visualize] Panel
[Threshold range Low / High] scale
Sets the range of intensity values to be used in image
building.
[Depth Weight] scale
Sets the weighting in the depth direction. By increasing this
setting, it is possible to provide the image with a perspective
by darkening the far objects and brightening near objects.
[Stereo Factor] text box
Sets the deviation between the left and right eyes when
building a pair of stereo 3D images or a 3D image to be
viewed through color (red/green) eyeglasses.
[Z stretch Factor] text box
Provides each multiple sections image with a feeling o
thickness. The value displayed here in advance has been
calculated by the system so that the scale in the planar, o
XY-direction of the image is identical to the scale in the
depth, or Z-direction. Usually, this value does not need to be
chan
ed.
To Next Page
Loading...
