APPLIED OPERATIONS/Viewing 3D Image
OPERATION INSTRUCTIONS
2-311
Page
10. Set the number of images to be rotating using the [Number of views] scale.
11. Click the <Begin Visualize> button to start building the animation. When the building
completes, the built image is displayed in the [3D Animation] panel.
The status bar shows the progress of building processing.
During the building, the <Begin Visualize> button turns into the <Cancel
Visualize> button. Click the <Cancel Visualize> button if you want to cancel the
building.
Fig. 2-129 Panel Showing the Built Image
12. Click and hold the <Display> button at the top of the [3D Animation] panel. The images
will rotate so that they can be viewed three-dimensionally.
Click the <Stop> button to stop the image rotation.
<Cancel Visualize>
button
<Display> button
TIP
TIP
TIP
To Next Page
Loading...
