APPLIED OPERATIONS/Merger/Extraction of Image Channels
OPERATION INSTRUCTIONS
2-346
Page
4. From the file list in the [Experiments in Memory] dialog box, select the file name of the
image from which to extract channels and drag it into the frame at the top left. The
icon of the image is displayed in the frame at the top left.
The mouse pointer turns into the image icon during dragging.
5. The channels of the image set in the [Experiments in Memory] dialog box are
connected to [Extract] by lines.
The lines from the image to [Extract] represent the channels, which are drawn
in order of numbers from the top to the bottom.
When the mouse pointer is approached to the icon-side end of a line
connected to [Extract], the color of the line end turns into yellow. Clicking the
line in this condition switches the channel between the selected and
deselected status alternately. The lines connected to [Extract] indicate the
selected channels.
Clicking a channel line in this area switches the
channel between the selected and deselected
status.
TIP
TIP
TIP
To Next Page
Loading...
