APPLIED OPERATIONS/Changing the Chart Display Method
OPERATION INSTRUCTIONS
2-355
Page
z [3D] sub-panel
Used to set the 3D display.
Switches between the 3D
and 2D chart display.
Enables or disables the 3D
display in the depth-wise
Enables or disables the
zooming display of characte
strings in the chart, such as
label characters, togethe
with the chart display.
Change the zoom ratio.
Rotates the chart in the
horizontal direction with
respect to the bottom side.
Moves the chart display
position in the horizontal
direction.
Moves the chart display
position in the vertical
direction.
Distorts the chart to change
the display effect.
Sets the 3D chart display
effect by varying the angle.
Rotates the chart in the
vertical direction with respect
to the bottom side.
To Next Page
Loading...
