Software Setup/Setting the System Configuration
MAINTENANCE
1-18
Page
2. Select “Edit”. The [Edit] dialog box as shown below appears.
3. Click the <OK> button after setting is completed.
The initial values are automatically set in the [Magnification], [N.A], [n], and
[Recommended Cofocal Pinhole] text boxes after the objective is selected in
the [Name of the Objective] drop-down list.
1-3-2-3 Setting the Color
1 Setting the color of the button disengaged from the light path
1. Right-click the mouse on the button whose color is to be changed. The pop-up menu as
shown below appears.
2. Select “Color”. The [Color] dialog box as shown below appears.
3. Select the color which you want to set in the color palette and click the <OK> button.
[Name of the Objective]
drop-down list
Select the name of the
objective in the list or enter
the name with keyboard.
[Name of the Linked
Condenser] drop-down list
Select the condenser worked
with.
[Magnification] text box
Enter the magnification of
the objective with
keyboard.
[N.A] text box
Enter N.A of the
objective with keyboard.
[n] text box
Enter refractive index with
keyboard.
[Recommended Confocal Pinhole] text box
Enter the number of the confocal pinhole with keyboard.
TIP
[Jog Fine Sensitivity] drop-down list
Set the amount of the fine movement o
the revolving nosepiece per rotation.
To Next Page
Loading...
