Software Setup/Setting the System Configuration
MAINTENANCE
1-20
Page
1-3-2-4 Finishing the setting
Finishing the setting and closing the [Microscope Setup] window.
1. Click the < Save New Setup> button to save the setup and close the window.
Or click the <Quit w/o Saving> button to cancel the setup and close the window. Then
the dialog box as shown below appears. If you want to save, click the <Yes> button, if
you do not want to save, click the <No> button.
After saving is selected in the [Microscope Setting] window, the original
setting is not returned even if the <Quit w/o Saving> is clicked in the
[FLUOVIEW Setup] dialog box.
<Save New Setup> button
<Quit w/o Saving> button
NOTE
To Next Page
Loading...
