Software Setup/Adding the filters
MAINTENANCE
1-26
Page
4. In the fifth field from the top of [Excitation DM] in the [DMs & Filters in SU] dialog box,
select the excitation dichroic mirror name (DM440 in this example) from the drop-down
list. The excitation diachronic mirror name (DM440 in this example) can also be typed in
from the keyboard.
5. In Channel 1 of [Barrier Filter] in the [DMs & Filters in SU] dialog box, select the barrier
filter name (BA465-495 in this example) from the drop-down list. The barrier filter name
(BA465-495 in this example) can also be typed in from the keyboard.
6. Click the <Save New Setup> button.
The [Save SU Setting] dialog box shown below appears. Click the <Yes> button.
The [FLUOVIEW Setup] dialog box closes.
To Next Page
Loading...
