Getting Started FLUOVIEW/Online Help
OPERATION INSTRUCTIONS
1-38
Page
3.
Click the <Apply> button to apply the selected dyeing method to the [Ch] group
box
on the upper part of the [Acquire] panel.
When the dyeing method is selected from the [Available Dyes] list box and the
<Apply> button is clicked, a channel for acquiring fluorescence is set
automatically according to the changed filter. And the dyeing method is shown
in the [Ch] group box.
The Confocal Aperture value is also set automatically according to the
wavelength and the objective per channels.
TIP
To Next Page
Loading...
