Getting Started FLUOVIEW/Online Help
OPERATION INSTRUCTIONS
1-50
Page
7. The [Pfcl Setup Wizard] group box displays the option button menu shown below.
Adjust the focal position and click the <Next> button.
Click to set the current focal position
as the parfocality correction value for
the current objective and proceed to
the setting of the next objective.
Click to set the parfocality correction
value of the current objective to “0.00”
and proceed to the setting of the next
objective.
Click to proceed to the parfocality
correction setting of the next objective
without changing the setting for the
current objective and jog sensitivity
values.
To Next Page
Loading...
