Omicron CPC 100 Reference Manual

Introduction
2 - 43
Test Procedure Default
The CPC 100 software always starts with the test procedure default. Initially,
that is, as long as no user-defined test procedure default is created, this default
contains one empty Quick test card. However, this default can be customized
according to your specific requirements with as many test cards as needed and
of all types of your choice.
In the CPC 100 file system, the test procedure default is not visible as a "file"
(refer to ”The CPC 100 File System” in chapter 9).
Note: With the CPC 100 V0, the number of test cards in one test procedure
should be limited to 15 to avoid memory problems. The CPC 100 V1
allows using more test cards in one test procedure but we recommend
not to use more than 15 test cards to keep the tests clearly structured.
If you need more test cards in one test procedure, we recommend not
to save all cards in one, for example, the test procedure default, but to
combine a smaller number of cards to logical groups, and to save
these logical groups as test procedure templates with individual
names (refer to ”Test Procedure Templates” on page 45 of this
chapter).

Omicron CPC 100 Specifications

General

Brand	Omicron
Model	CPC 100
Category	Test Equipment
Language	English