Omron CX-SUPERVISOR - V2.0 - Chapter 11 - Data Logging

CHAPTER 9 – Animation OMRON
Page 148 Release 2.0
The object can have one of five colours depending on the value of the expression. It changes
between these colours at the thresholds. For example, choose the colour blue for the first colour, and
the value 20 for the first threshold. The object then changes to blue until the value reaches 20, at
which point it changes to the second colour. To apply the change to the frame of the object, select
the Apply colour changes to object frame setting. To apply the change to the object background,
select the Apply colour changes to object background setting.
On selection of a colour in the Colour Change (Analogue) dialog, the Colour Palette dialog is
displayed. The Colour Palette dialog is described in chapter 9, Common Colour Palette.
Click the Clear pushbutton to reset all colours and re-start. To abort the Colour Change (Analogue)
edit, click the Cancel pushbutton. By clicking the Browse pushbutton, a point may be directly
specified, as described in chapter 9, Runtime Actions. Once completed, click the OK pushbutton. If
invalid data has been inserted into any field, a descriptive error message is displayed.
Colour Change (Digital)
Objects can be animated so they change between two colours. This is achieved using the Colour
Change (Digital) dialog.
To access the Colour Change (Digital) dialog to add an action, select Colour Change (Digital) from
the animation list and click the Add Action button on the toolbar. To access Colour Change (Digital)
dialog to modify an action, select Colour Change (Digital) from the animation list and click the
Modify Action button on the toolbar. For a list of the objects to which this action is applicable refer
to chapter 9, Objects.
On selection of the Colour Change (Digital) action, the Colour Change (Digital) dialog is displayed:
To specify a change in an object’s colour, enter a Boolean expression in the Digital Expression: field.
Non-Boolean expressions may be entered as long as the result is ‘TRUE’ or ‘FALSE’.
The colours are specified in the Colour Attributes: fields for Boolean State 0 and Boolean State 1. To
apply the change to the frame of the object, select the Apply colour changes to object frame setting.
To apply the change to the object background, select the Apply colour changes to object background
setting.