APPENDIX E – Using with the Omron DyaloX OMRON
Page 310 Release 2.0
5. Copy the desired runtime application.
Note: Remember that drive C is for the operating system, and space may become limited. Consider
installing other software to other drives (like additional flash cards or USB keys). However, note that
typically, all software automatically installs some files to Windows system folders, or Common
folders on the C drive even if the program is installed to another drive.
Communication Settings
The USB port can be used to communicate with compatible Omron hardware. The CX-Server USB
drivers for the USB PLC must be installed manually if required, and can be found in the CX-Server
installation directory.
Note: At runtime, the DyaloX IPC can only use the COM ports that are configured in the operating
system. The Development platform therefore must have the same COM ports available so they can be
selected at development time, and the same port available for use at runtime. If required, it is possible
to reconfigure the COM port for a configured device once the application is compiled if the “Embed
CX-Server Project within CX-Supervisor .SR2 file” setting is turned off so the devices settings can
be editing on the target platform.
To Next Page
Loading...
Need help?
General