OMRON CHAPTER 6 – Projects
Release 2.0 Page 95
Select a language from the Language for User-Defined Text: field. Click the OK pushbutton to
accept the settings, or the Cancel pushbutton to abort the operation.
Point Substitution Settings
The enclosing characters associated with a report can be changed via the Point Substitution Settings
dialog. Once set, these characters must be fixed for all reports generated by the project. Select
Runtime Settings from the Projects menu, followed by Point Substitution Settings to display the Point
Substitution Settings dialog.
Supply enclosing characters in the Opening Characters: field and Closing Characters: field. Click
the OK pushbutton to accept the settings, or the Cancel pushbutton to abort the operation.
Advanced Settings
To open the Advanced Settings dialog select Advanced Settings from the Runtime Settings menu.
The dialog is displayed as follows:
To Next Page
Loading...
Need help?
General