OMRON CHAPTER 9 – Animation
Release 2.0 Page 159
A colour can be selected by clicking on one of the palette colours. This becomes the selected colour,
and is denoted as such in the Selected Colour: field. Alternatively, a colour can be selected by
specifying a colour name or number in the Colour Name: field. The selected colour within the
palette can be mixed by using the red, blue and green scroll bars to the right of the palette.
Each colour in the colour palette is numbered from 0 to 65, number 0 located in the top-left position
of the palette, with numbers reading consecutively across, then down, with colour number 65 in the
bottom-right position of the palette. Additionally, colour numbers 0 to 19 are named — for instance,
colour number 0 is named “black”.
Colours 0 to 15 inclusive are system colours and cannot be mixed. Although it is possible to mix
new colours using the scroll bars, it is not possible to save such changes from this palette. To ensure
new colours are saved, use General Settings from the Project menu.
Note: Using a 16 colour-based screen resolution (consult the Microsoft Windows
documentation for further information) colours 16 to 65 are dithered from the
sixteen base colours. Higher colour-based resolutions are not dithered.
To Next Page
Loading...
Need help?
General