16 / 374
SOCT User Manual Version 10.0 rev. A
- To avoid pinching the patient, check the patient’s head position before raising the chin
rest
- Clean the ocular lens frequently to ensure good image quality.
- Adjust power table height properly to ensure patient comfort during the examination.
- Raise or lower the patient’s head so the eye aligns with the canthus mark on the chin
and forehead rest assembly.
- Warn others not to sit or stand on any part of the table, including the base and the top.
- When lowering the table, make sure that pinch point areas are clear of people and
articles; do not store articles in these areas.
Note: Chemically induced pupil dilation is not normally needed.
This device is not designed, sold or intended for use except as indicated.
Contraindication
Do not use the SOCT for those patients who:
- Have an anamnestic history of photodermatosis,
- Have undergone photodynamic therapy (PDT) within48 hours (refer to the product
document of administered photosensitizer about the prohibition period),
Instruction Manual Availability
The SOCT Instruction Manual in PDF format is available on the computer with installed SOCT
application. To open the file, press START → Application → SOCT → User Manual. The manual
is included on USB flash drive delivered with the standard package of the SOCT. Install the .pdf
file viewer e.g. free Adobe Reader from the www.adobe.com website or flash drive to read the
manual in PDF format.
The Instruction Manual in paper form is available on request. To receive user manual in
hardcopy please contact authorized OPTOPOL representative to receive it.
Instruction Manual Applicability
This document applies to the SOCT running with the application software version 8.0 or
higher, unless superseded.
To Next Page
Loading...
