36 / 374
SOCT User Manual Version 10.0 rev. A
General notes
Please avoid the use of extension cords or a power strip.
IMPORTANT:
1. If the whole Medical System has been installed by Manufacturer of SOCT or
Authorized Personnel, the manufacturer guarantees correct installation and
compliance with all required standards and directives.
2. In case installation was made not by Manufacturer or Authorized Personnel, the
manufacturer of SOCT takes no responsibility for any problems or risks that could
be created by incorrect connection and violation of safety standards.
3. Understanding and following up of chapters 5 SOCT SOFTWARE, 6 PATIENT
WINDOW, 7 EXAMINATION WINDOW, 8 CONDUCTING EXAMINATION and 9
RESULT REVIEW of this manual as well as PC experience are sufficient for
operation of the SOCT device.
4. Manufacturer of SOCT takes no responsibility for incorrect medical diagnosis of
results and takes no responsibility for the consequences of such incorrect
medical diagnosis.
NOTE: OCT image is a plot of optical path length. Depending on the optical design
and scanning location, the image can be distorted from its actual physical shape. For
example, a relatively flat retinal OCT image might not reflect the true curvature of
the retina.
NOTE: The OCT image can be affected by the optical pathway, that is, by corneal
opacity, cataract or eye shape.
NOTE: The SOCT is a medical device. The software and hardware have been
designed in accordance with European, U.S. and other international medical device
design and manufacturing standards. Unauthorized modification of the system
software or hardware, or any addition or deletion of any application in any way, can
jeopardize the safety of operators and patients, the performance of the instrument,
and the integrity of patient data.
NOTE: Any changes, additions or deletions to factory installed applications, the
operating system, or modifications to hardware in any manner voids the warranty
completely and can cause safety hazards.
NOTE: Cornea Layers recognition is used for tracing.
NOTE: For Corneal topography scan fully examine the measured tomograms for
layer recognition and examination results. In particular, if the difference between
To Next Page
Loading...
