32 / 374
SOCT User Manual Version 10.0 rev. A
WARNING: Do not forget user LOGIN and PASSWORD the only way to open the
software is to enter this information. In case of problems please contact
your local distributor.
WARNING: Make sure there is enough free space on HDD/remote folder before
performing backup process.
WARNING: All maintenance activities can only be made when the device is turned
off and unplugged from power supply socket.
WARNING: There are no user serviceable parts inside the device. Any covers can be
removed only by authorized service staff.
WARNING: The main lens of the device should not contact the patient's eye or face.
WARNING: Use of accessories, transducers and cables other than those specified or
provided by the manufacturer of this equipment could result in
increased electromagnetic emissions or decreased electromagnetic
immunity of this equipment and result in improper operation.
WARNING: Use of this equipment adjacent to or stacked with other equipment
should be avoided because it could result in improper operation. If such
use is necessary, this equipment and the other equipment should be
observed to verify that they are operating normally.
WARNING The user is fully responsible for all data entered or changed manually in
the IOL Calculation tab. Calculation parameters are determined at the
user’s discretion and it is the user’s responsibility to make sure they
guarantee obtaining a result optimized for a given case.
WARNING Any imported IOL data must be reviewed and accepted by the operator
prior to using it. The full responsibility for using any imported IOL data
form any source lies on the user. Imported IOL data must not be
regarded as recommendation in favor or against using any particular
lens on a patient. IOL data obtained from ULIB, IOL Con or any other
source only presents an overview of available lenses. OPTOPOL
Technology does not take any responsibility for the quality or
correctness of data imported into the system.
To Next Page
Loading...
