Panasonic fp2/fp2sh - Page 309

11-41
FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
Name Descriptions
Read-
ing
Writ-
ing
FP3
FP2/
FP2SH
FP10SH
DT9136
DT9137
DT90136
DT90137
Error code
of
MEWNET-F
(remote
I/O) system
Display the error conditions for 8 types of
errors using 1 byte.
A N/A
DT9138 DT90138 Not used
-
N/A N/A
DT9139
DT90139
Not used
-
DT9140 DT90140
MEWNET-
W/-P
PC(PLC)
link status
[PC(PLC)
link 0
(W/P)]
(*Note2, 3)
The number of times the receiving operation
is performed (counted using ring counter)
N/A N/A
DT9141
(*Note1)
DT90141
The current interval between two receiving
operations: value in the register x 2.5 ms
DT9142
(*Note1)
DT90142
The minimum interval between two receiving
operations: value in the register x 2.5 ms
DT9143
(*Note1)
DT90143
The maximum interval between two receiving
operations: value in the register x 2.5 ms
DT9144
(*Note1)
DT90144
The number of times the sending operation is
performed (counted using ring counter)
DT9145
(*Note1)
DT90145
The current interval between two sending
operations: value in the register x 2.5 ms
DT9146
(*Note1)
DT90146
The minimum interval between two sending
operations: value in the register x 2.5 ms
DT9147
(*Note1)
DT90147
The maximum interval between two sending
operations: value in the register x 2.5 ms
Note1) Used by the system.
Note2) When the system register 46 = K0, First: PC(PLC) link 0, second: PC(PLC) link 1
When the system register 46 = K1, First: PC(PLC) link 1, second: PC(PLC) link 0
Note3) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH