Panasonic FP7 User Manual

Errors and Warnings
15-2
15.1 About Errors and Warnings
15.1.1 Errors and Warnings
If any operational unconformity occurs in the positioning unit, an error or warning will occur.
When an error or warning occurs, the following operation will be performed.
Errors
Occurs in any abnormal conditions. When a motor is operating, the operation stops.
The motor stopped due to the occurrence of error will not be activated until the error clear is
executed.
Warnings
Occurs if there is any operational unconformity but not abnormal.
The operation can continue even after the occurrence of warnings, and the motor continues
running if the motor is operating.
15.1.2 Check and Clearing with Configurator PM7
It is possible to check and clear data on an axis-by-axis basis by selecting [Online] → [Status
monitor] on the Configurator PM7 programming tool.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Panasonic FP7 Specifications

General

Series	FP7
Manufacturer	Panasonic
Input Voltage	24 V DC
Data Memory	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Type	Programmable Logic Controller (PLC)
Output Type	Relay, Transistor
Number of Inputs	Varies by model
Number of Outputs	Varies by model
Communication Ports	Ethernet, RS232C, RS485