Unit Allocation and
Parameter Settings
5-2
5.1 Unit Allocation
5.1.1 I/O Map Registration
Register the unit with the I/O map before making parameter settings.
1. Select “Option”
→ “FP7 configuration” from the menu bar.
The FP7 configuration dialog box will be displayed.
2. Select “I/O map” from the left pain.
The I/O map allocation menu will be displayed.
3. Double click the desired slot.
The unit selection dialog box will be displayed.
4. Select “Positioning” from the unit type, select the name of the unit to be
used, and press the [OK] button.
The message “Updating data display” appears, and the unit selected in the I/O
map is registered.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
