Chapter 3: Configuring Your Library
Setting Up Policies for the Physical Library
182 Quantum Scalar i6000 User’s Guide
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > System Settings > Physical Library. The Physical
Library dialog box appears.
IPv6 Enabled: will support the configuration of IPv6, as well as IPv4,
network settings.
Disabled (default): will not support the configuration of IPv6
network settings and only allow IPv4 network configuration.
Extended I/E Enabled: will support the configuration of storage slots as I/E slots,
extending the number of available I/E slots for host configurations
that require non-I/E elements not physically provided in I/E stations.
Disabled (default): will not allows I/E slot extensions to be
configured.
EKM Path Diagnostics Enabled (default): EKM server connectivity and functionality are
performed in regular intervals to alert of connectivity or
operational issues.
Disabled: EKM path connectivity and functionality tests are not
performed.
Send Usage Statistics Enabled (default): If e-mail notification settings are configured,
library usage and performance data will be sent to Quantum for
statistical review purposes. These emails contain configuration and
status information only, and do not contain any customer data
stored on the system.
Disabled: Usage statistics are not sent regardless of e-mail
notification settings.
Policy Settings
To Next Page
Loading...
Need help?
General
