Chapter 3: Configuring Your Library
Setting Up E-mail Notifications
194 Quantum Scalar i6000 User’s Guide
11 In the Email Address text box, type the e-mail address to which you
want to send notifications.
Note: Do not enter more than one address in the Email Address
text box. Continue to Step 7 and Step 8 for this address,
and then repeat Step 5 through Step 8 for each additional
address.
12 In the Choose Severity box, click the severity level you want to
assign to this e-mail address.
Note: If you are using the remote client LMC, you can assign
more than one severity level. While pressing the Ctrl key,
click the severity levels you want to assign. The touch
screen on the library enables you to select only one severity
level.
To Next Page
Loading...
