Chapter 3: Configuring Your Library
Configuring Library Security
238 Quantum Scalar i6000 User’s Guide
• To allow or prevent remote LMC client access to the library
• To set up firewall access for server callbacks to remote clients
• To enable or disable service login
• To set up the length of time before a session timeout
1 Click the LMC tab on the Security Configuration dialog box.
2 Change the security settings for any of the following items:
• Remote Access — To prevent all remote LMC clients from
accessing the library, select Disable. To allow them to access the
library, select Enable.
•Select Use SSL to enable secure communication between the
LMC client and the library.
Note: Enabling SSL can impact the network performance of
remote operations (for example, downloading new
library software).
• Callback Port Range — To configure firewall access for server
callbacks to remote clients, type the first port number of a
To Next Page
Loading...
