Chapter 3: Configuring Your Library
Using LDAP
Quantum Scalar i6000 User’s Guide 243
2 In the General tab, configure the following items:
• Enable LDAP:
• To enable LDAP, select Enable LDAP.
• To disable LDAP, clear the Enable LDAP check box.
Note: If you disable LDAP, single sign-on functionality will
not be available on the library.
• Server Configuration section:
• Primary: You must provide a primary IP address or DNS
name.
• Alternate: An alternate IP address or DNS name is optional.
• Secure: Use this check box to enable the setup options to
access a secure LDAP server, which can be done using any
port except 389. The default secure port is 636. If you
enable this option, you must retrieve the trusted root
To Next Page
Loading...
