Chapter 11: Configuring Access to StorNext
Quantum Scalar i6000 User’s Guide 425
5 Click Finish. A success dialog box appears.
Caution: If you get an error dialog box that says, “Failed to
validate the External Application,” this may mean that
the IP address or host name is incorrect, or the server is
not responding or not configured. The library will
accept the settings you entered, but you should
double-check that all the information is correct and
modify it if necessary. If any of the configured
information is incorrect, successful communication will
not occur.
6 Click OK to close the dialog box.
API Client Plug-in Select the appropriate API client plug-in
from the drop-down list. The list contains
the API client plug-ins you installed in
Step
2: Installing/Removing the Scalar i6000 API
Client Plug-in on page 420.
Application IP/Host
Name
Type the IP address or DNS host name (if
DNS is configured) of the external
application server.
Note: To use a host name, DNS must be
configured on the LMC (Setup >
Network Configuration > DNS
Configuration).
Application Port
Number
Accept the default or type an external
application host server port number.
Field Description
To Next Page
Loading...
