Quantum Scalar i6000 User Manual

Chapter 14: Using the Command Line Interface
Command Line Interface (CLI) Commands
506 Quantum Scalar i6000 User’s Guide
example of move media with error:
/>mov med p1 m1 s1
Partition 'Logical Library 01' must be taken offline prior to performing the
operation.
Changing the partition mode to offline will cause robotics actions against
this partition to fail, please ensure all backup applications are not
currently using this partition.
Enter 'y' to continue or 'n' to skip [default='n']: y
Partition 'Logical Library 01' is going to be taken offline.
Moving '000038L3' from Mailbox slot 1 to Storage slot 1
ERROR: Robot is not ready.
Partition 'Logical Library 01' set back online!

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing