Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 581
Click Tools > Update Software > Library. The Update Software
Wizard dialog box appears.
Note: Each firmware release has specific upgrade instructions
included with the release. These specific upgrade
instructions need to be followed to ensure that the
firmware upgrade will be successful. Contact Quantum
Support to obtain specific drive firmware upgrade
instructions.
This dialog box explains the operations you can perform by using
the Update Software Wizard.
3 If you are ready to proceed, click Next. If you are not ready to
proceed, click Cancel. The Select Library Software Package for
Installation dialog box appears.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing