Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
582 Quantum Scalar i6000 User’s Guide
The remaining procedures in this section start with the Library System
Software Update dialog box.
Installing New Library Software
To update your library software, you must download a new library
software package to the library’s management control blade (MCB)
from the remote client’s file system, and then install the downloaded
software. You can perform the library software update from either the
library’s touch screen or a remote client, but you must perform the
software download to the MCB from a remote client.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing