Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 587
Real-time progress information appears under Progress Summary
in the Description and Status columns.
Once 100% success has been achieved for all components, the
library is shutdown. This process could take several minutes.
6 Once complete, the Software Update Progress screen appears,
click OK. The Attention message appears informing you that the
software update was successful, the library will be rebooting, and
that you have been automatically logged off from the system.
Note: If the software update was not successful, a RAS ticket is
generates. Resolve all RAS tickets and begin the software
update process again.
7 Click OK. The message Library is being shutdown... appears. This
action may take a few minutes. The Operation in Progress screen
appears.
8 Log off close the browser.
9 Launch the browser and log in again after the library has completed
it’s reboot process.
10 Click Help > About. Validate that the components reflect the
correct firmware version.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing