Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
588 Quantum Scalar i6000 User’s Guide
Reinstalling Current Library Software
The reinstall feature enables you to re-establish the installation of the
library software that is currently active on the MCB to the various
remote devices, such as the RCU, I/O blades, and the CMB. Perform this
procedure if the RCU has been replaced and you want to bring it to the
level that is on the MCB.
1 On the Library System Software Update dialog box, select
Reinstall current package.
2 Click Next. The Update Software Wizard dialog box appears.
Click Install. The Software Update Progress dialog box appears.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing