Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 589
Note: If the physical library is not offline, you receive a message
that asks you whether you want to take it offline. Click Yes.
The library automatically logs off other users so that they
cannot perform library operations while the library
software update operation is in progress.
Real-time progress information appears under Progress Summary
in the Description and Status columns.
Note: The components that already have the correct version
loaded will transition to a “Success” status quickly during
the reinstall process.
3 After the update process completes, click OK. Within approximately
a minute after completing the update process, the RCU restarts.
Caution: Do not perform any library operations until the RCU is
completely restarted.
Note: Before the RCU is restarted, the main menu Activity panel
displays the message WARNING: The Robotics is not
Enabled. This message indicates that the RCU is not yet
ready. When the RCU is ready, the message disappears.
4 Bring the physical library online.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing