Quantum Scalar i6000 - Page 631

Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 613
• All Drives by Coordinate: Presents the sum total of all
attributes for all drives in the library.
• All Drives by Physical SN: Presents the sum total of all
attributes for all drives according to the physical drive SN.
• All Partitions: Presents a comparison of all drives grouped
by partition in the physical library.
• Selected Drive by Coordinate: Graph is based on an
individual drive according to the library system coordinates.
For example, 1,1,1,1,1,1.
• Selected Drive by Physical SN: Graph is based on an
individual physical drive SN.
• Selected Partition: Graph is based on an individual
partition in the physical library.
• All Media: Presents all media for all drives.
• Select Media: Presents selected media by media ID.
• Attribute
• Data Written/Read
• Mount Count
• Media Motion Time
• Total Read and Write
•Type
• Rollup: A device x-axis for the display of attributes by drive
or library.
• Trend: A time scale x-axis for the display of the trend of the
particular attribute.
• Chart: Choose from the following charts to visually display your
data:
•Bar
•Bar 3D
•Line
• Stacked Area
•Stacked Bar