Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Maintenance Actions
640 Quantum Scalar i6000 User’s Guide
• If there are multiple failed results in an area, review the area to
make sure it is not prone to problems. Also run the library
alignment test (part of the installation verification or partial frame
test) to make sure the library is level.
• If there are a large number of issues, use rubbing alcohol to clean
the picker fingers and the detents in the side of the tapes.
• If the problems persist, you may need to replace the picker
assembly.
See Figure 74 on page 641.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing