RFL Electronics IMUX 2000 - Index

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
10.3 INDEX
M-DACS-T1 RFL Electronics Inc.
A
ADAPTERS · 2-47
COMMON INTERFACE · 2-34
MA-235, MA-240 · 2-34
MA-260, MA-262 · 2-35
MA-810 · 2-42
OPTICAL INTERFACE · 2-36, 2-37
ADDING CHANNEL MODULES · 7-21
ALARM CUT-OFF SWITCH · 4-26
ALARM I/O MODULE · 9-9
THEORY OF OPERATION · 9-9
ANALOG/DATA TEST EQUIPMENT
CHANNEL TESTS · 8-9
APPLICATION NOTES · 17-1
APPLYING POWER · 7-12
ARRANGING SERVICE · 8-18
B
BAUD RATE
SETTING · 4-15
BLOCK DIAGRAM
M-DACS SYSTEM · 3-3
C
CHANNEL MODULE
INSTALLATION · 7-22
CHANNEL MODULE CHARACTERISTICS · 3-10
CHANNEL MODULE TYPES · 3-10
CHANNEL MODULES · 2-47
ASYNCHRONOUS · 11-1
CONFIGURATION · 3-13
POWER · 3-14
SYNCHRONOUS · 12-1
CM4 INTERFACE
SETTING · 4-22
COMMON MODULE
STANDARD GROUPS AND FUNCTIONS · 2-55
T1 INDICATORS, TOGGLE SWITCHES · 2-54
COMMON MODULE DIAGNOSTICS · 8-11
COMMON MODULES · 2-27
COMPONENTS
M-DACS · 2-22
CONNECTIONS
REAR PANEL, POWER AND RELAY · 2-62
CONTROLS AND INDICATORS
FRAMER MODULE · 2-26
PROCESSOR MODULE · 2-25
CROSS CONNECT · 2-5
CROSS CONNECT AND LINE SWITCH
COMPARISON · 2-8
MODES OF OPERATION · 2-9
D
DACS MODULE
MAP, ACTIVE · 2-12
TYPICAL MAP · 2-13
DIAGNOSTIC DATA
DIAG · 4-11
DIAGRAMS
ALARM LOG REPORT · 5-49
CM4 COMMUNICATION CONTROL · 2-28
CM4, GROUPS AND FUNCTIONS · 2-58
COMPLETE NETWORK INFORMATION REPORT · 5-
53
CONNECTION VIEW REPORT · 5-54
CROSS CONNECT AND LINE SWITCH
DATA PATHS · 2-8
DACS MAP DIFFERENCE REPORT · 5-56
DACS MAP REPORT · 5-54, 5-55
DACS MO
DULE IN ILS MODE · 2-7
EFFECT OF DIRECTION SETTINGS · 3-12
EVENT LOG REPORT · 5-58
FIBER RING
AFTER FAILURE · 2-15
BEFORE FAILURE · 2-14
GROUPS AND FUNCTIONS · 4-31
LOOPBACKS · 4-8
M-DACS FRONT AND REAR · 2-23
MODULE LOCATION · 3-2
NETWORK DIAGRAM REPORT · 5-59
NETWORK EXAMPLE ·
5-15
PATH AND PORT NUMBERS · 2-10
PC TO 4 NODES
DIFFERENT NETWORK · 5-7
SAME NETWORK · 5-8
PC TO NODE
FROMREMOTE LOCATION · 5-6
RS-232 OR ETHERNET · 5-5
POWER SUPPLY · 2-44
POWER SUPPLY, REMOVAL/INSTALLATION · 7-3
SAG CONNECTIVITY · 2-41
DOWNLOAD · 2-33
DROP AND INSERT
FUNCTIONALITY · 2-3
LINEAR · 2-3
DSO
GROOMING · 2-11
E
ERROR DETECTION · 2-11
ERROR RECOVERY · 2-11
ERRORS
CARRIER · 8-3
PAYLOAD · 8-3
April 1, 2007 10-7 (973) 334-3100